Ice Shower 20

iCoolsport Ice Shower 20, for the busiest professional recovery centres, for virtually continuous cold showers, up to 20 per hour, all day, every day

• Up to 20 instant ice-cold showers per hour, all day, every day.
• Set your ice shower temperature from 4ºc to 10ºc
• Simple installation, connect your mains water in and an ice shower out via standard hose connections
• Connect to your existing shower head.
• Touch button start
• Selectable shower duration for accurate recovery protocols
• Automatic refill and rechill
• Suitable for both home and commercial use
  

Location and Ventilation

Connect your ice shower chiller and holding tank ideally within 5 metres from your shower head. If operating in extremely hot environments, it's also recommended to insulate your hose from the Ice Shower. In most cases, you won't need to do this because the time the water is in the hose is minimal. 

Chillers need to breathe. Ensure your Ice Shower chiller has adequate ventilation. This means having air flow at least 200mm on the back, left, and right sides of the chiller.

Heat extraction is always advised in any plant room operating refrigeration systems, such as the ice shower or ice bath chillers.

Cleanliness

Due to high water turnover, it's unlikely that bacterial buildup will occur in the small tank inside the chilling system; however, we have designed the ice shower to enable easy access to clean the tank if required.

There is also a straightforward feature on our touchscreen controller that lets you empty the tank when the ice shower is not in use.

Setting the system back up for re-use by filling and chilling should take no more than 45 minutes when connected to standard mains water pressure.

When ordering for international markets outside of Australia/New Zealand

Our products can be configured to either 220V or 110V for international customers, such as those in the United States of America.

Most North American houses already have 220V enabled for greater electrical efficiency.

If you’re unsure, speaking with your electrician could help you enable your home/commercial premises to run on 220 volts, which makes for much more efficient power for any electrical products.

When ordering, select your preferred configuration or submit a special request via email or phone. This can be done before or after placing an online order.